Skip to content

Language

Trojan Trailer Parts Best Sellers: The Axles, Hubs, Brake Calipers, Tail Lights and Couplings Kiwis Are Buying Now

Before the boat, the bikes or the camping gear goes on the back this summer, it pays to give the trailer itself a once-over. Axles, hubs, brakes, lights and the coupling all take a hammering from salt water, gravel roads and months sitting in the yard. We went through our real sales from the last 90 days to see which Trojan Trailer Parts Kiwis have been buying, and this round reads like a proper pre-summer trailer service, from the axle up to the hitch.

1. Trojan Straight Beam Axle – Non-Braked, 1500kg, Galvanised

Trojan galvanised straight beam non-braked trailer axle rated 1500kg

When an old axle is rusted through or bent, replacing it is often the best fix. This Trojan straight beam axle is non-braked and rated to 1500kg. It's a galvanised 50 x 50 RHS beam, built for leaf spring suspension, so the finish stands up to wet and salty conditions far better than painted steel.

It's bought by people rebuilding older box, utility and boat trailers, and by anyone building a single-axle trailer from scratch.

Price: $299.00 – View the 1500kg straight beam axle

See all straight beam axles, the wider axles range, or the single axle trailer kits.

2. Trojan Disc-Braked Early Model Hub – 225mm, 5 x 4-1/2"

Trojan disc-braked early model trailer hub 225mm 5x4-1/2 stud pattern

Worn hubs are one of the most common reasons a trailer ends up on the side of the road. This disc-braked early model hub has a 225mm diameter and a 5 x 4-1/2" stud pattern, and it's set up for disc brakes, so it suits retrofits and refurbishments on older braked trailers. It comes with its bearing kit (TPT1184) and seal kit (TPT10131), so you aren't hunting around for matching parts.

Buyers are mostly people bringing a tired braked trailer back up to scratch before summer.

Price: $274.00 – View the 225mm disc-braked hub

More in disc-braked hub kits and all hub kits.

3. Trojan Hydraulic Caliper MK6 – Stainless Steel

Trojan MK6 stainless steel hydraulic trailer brake caliper

Boat trailers get dunked in salt water every time you launch, and that's hard on brakes. This MK6 caliper is cast in high-grade stainless steel for corrosion protection, with phenolic pistons and brass or stainless fittings. The brake pads that come with it have a stainless backing plate, which stops the lining separating because of corrosion. It's sold each, and spare parts are available.

It's a favourite with boaties whose original calipers have seized or rusted.

Price: $386.18 each – View the MK6 stainless caliper

Browse disc brake calipers, caliper spares and all brake components.

4. LED Tail Light Set – 100 x 100mm, 10-30V

LED trailer tail light set 100x100mm 10-30V left and right

Trailer lights that only half work are a common pre-trip headache. This Whitevision CRL20 set comes as a left and right pair, and each lamp does stop, tail, indicator and licence plate lighting with a built-in reflector. They run on 10-30V, measure 100 x 100mm with 400mm cable leads, and have a low-profile body that suits plenty of retrofits. They're ADR compliant.

They're popular with anyone swapping out old bulb lights that keep failing after a dunk at the ramp.

Price: $97.00 – View the LED tail light set

More trailer lights and plugs, sockets and looms.

5. Trojan Lever Coupling TC30 – 2000kg, 1 7/8" Ball

Trojan TC30 lever trailer coupling 2000kg for 1 7/8 inch ball

Billed as New Zealand's most popular trailer coupling, the TC30 is fitted as original equipment by major trailer manufacturers. It's cast in steel for strength and is simple to use. This version suits a 1 7/8" ball, is rated to 2000kg, and bolts on with four 10mm high-tensile bolts. Check the bolt-hole centres against the diagram on the product page before you order.

It was one of the busiest couplings of the last three months, mostly bought as a straight swap for a worn or sloppy coupling on everyday trailers.

Price: $65.00 – View the TC30 lever coupling

See all non-braked couplings or the full couplings range.

Also popular

If you're pulling hubs apart anyway, the 1500kg early model hub bearing and seal kit ($184.00, sold each) has been selling well. Caravan owners running a Cruisemaster DO35 have been picking up the DO35 tow pin kit with a 1" shaft ($132.00), and the Hayman Reese multi-ball kit ($113.35) lets you swap ball sizes in seconds without tools. There's more in towing.

Made for NZ trailers and Pacific conditions

Trojan parts are built for the way New Zealanders use trailers: boat ramps, gravel roads and long summer trips. We also supply trailer parts to customers across the Pacific Islands, where salt air is just as tough on axles, hubs and brakes. Not sure what fits? Send us your measurements or old part numbers and we'll help you find the right part.

Browse our full range at actionoutdoors.kiwi.

Next article Trojan Trailer Parts Best Sellers: The Electric Winches, Couplings, Coupling Locks and Spring Kits Kiwis Are Buying Now