Skip to content

Language

Trojan Trailer Parts Best Sellers: The Towball Mounts, Axles, Hubs and Couplings Kiwis Are Buying Now

November is when a lot of trailer projects get finished. The boat needs to be ready before Christmas, the old box trailer finally gets the rebuild it's been waiting for, and anyone towing something heavier this summer starts thinking about getting the hitch height right. We went through our real sales from the last 90 days to see which Trojan Trailer Parts Kiwis have been buying, and this round is all about the bits that connect the trailer to the car and keep it rolling underneath.

1. Trojan Pro Towball Mount – Adjustable, 3500kg

Trojan Pro adjustable heavy duty towball mount 3500kg

If your trailer sits nose-up or nose-down behind the ute, this is the fix. The Pro Towball Mount (PRO7217) adjusts from a 90mm drop to a 114mm rise, so you can get the trailer sitting level whatever vehicle is towing it. It's rated to 3,500kg with a maximum ball weight of 350kg, and offers three ball-to-pin lengths (316mm, 290mm or 265mm). Just remember your towing limit is always set by the lowest-rated part of the whole set-up.

It's popular with tradies who tow different trailers, and with families who swap between vehicles of different heights.

Price: $353.00 – View the Pro Towball Mount

See more tow ball mounts and towing gear.

2. Trojan Straight Beam Axle – Non-Braked, 1500kg, Galvanised

Trojan galvanised straight beam axle non-braked 1500kg

Rust usually gets to the axle long before the rest of the trailer is finished. This one is a 50 x 50mm RHS galvanised beam, rated to 1500kg non-braked, and designed to work with common leaf spring suspensions. The galvanising is what makes it a good fit for boat trailers and anything that lives outside.

Buyers are mostly people building a new trailer or replacing a rotten axle on an old one.

Price: $299.00 – View the Straight Beam Axle

Browse straight beam axles or the full axles range.

3. Trojan Non-Braked Hub Kit – 5 x 4 1/2" x 1/2"

Trojan non-braked hub kit 5 x 4 1/2 inch stud pattern

A new axle needs hubs, and this kit suits the most common NZ trailer stud pattern: five 1/2" studs on a 4 1/2" PCD, which matches a lot of everyday trailer rims. It's rated to 1500kg GVM per axle (a pair of hubs on a single axle), and comes in two flange set-ups to suit different wheels.

It's a regular buy alongside the axle above, and for anyone whose old hubs have started to grind or wobble.

Price: $200.00 – View the Non-Braked Hub Kit

More in non-braked hub kits and all hub kits.

4. Duofit Override Hydraulic Coupling – 2500kg (T201667)

Trojan Duofit override hydraulic trailer coupling 2500kg

For heavier boats and trailers with hydraulic brakes, the coupling does the hard work. This spring-dampened override coupling suits both 50mm and 1 7/8" tow balls, is rated to a maximum GVM of 2500kg, and is made from cast iron with corrosion protection. Trojan says its Duofit spring couplings comply fully with the NZ towball coupling standard NZS5232.

It's the one people pick when upgrading a braked boat trailer.

Price: $455.00 – View the Duofit Override Hydraulic Coupling

See all braked couplings.

5. Trojan Coupling V2 – 2500kg Duofit, 50mm and 1 7/8"

Trojan Duofit coupling V2 2500kg 50mm and 1 7/8 inch

Trojan calls this New Zealand's most popular trailer coupling, and it's fitted as original equipment by trailer makers. The handy part is that it automatically fits either a 50mm or a 1 7/8" tow ball, without swapping the handle. It bolts on with four 10mm high-tensile bolts.

It's a straightforward swap for anyone whose old coupling has worn loose or seized.

Price: $128.42 – View the Coupling V2

More non-braked couplings and all couplings.

Also popular

The stainless steel MK6 hydraulic caliper ($386.18 each) has been a steady seller for boat trailers, as has the simpler 2500kg Duofit coupling ($92.00), which swaps between ball sizes by rotating the handle. If you tow with different ball sizes, the stainless Convert-a-Ball 3-ball kit ($320.00) covers 1 7/8", 50mm and 2 5/16". There's more in brake components.

Built for NZ trailers and Pacific salt air

Trojan parts are designed for the way New Zealanders use trailers: boat ramps, gravel roads and long summer trips. We also supply trailer parts to customers across the Pacific Islands, where galvanised and stainless parts make a real difference. Not sure what fits? Send us your measurements or old part numbers and we'll help you match it.

Browse our full range at actionoutdoors.kiwi.

Previous article Trojan Trailer Parts Best Sellers: The Electric Winches, Couplings, Coupling Locks and Spring Kits Kiwis Are Buying Now
Next article Trojan Trailer Parts Best Sellers: The Wheels, Locks, Lights and Spring Kits Kiwis Are Buying Now